Original Hitchlock HL2 for Unbraked Trailers

£66.67

The SAS HL2 Hitch Lock is a secure and versatile hitch lock for unbraked trailers that can be locked when hitched or unhitched to the towing vehicle.

Description

Original SAS Hitchlock HL2 for Unbraked Trailers

Insurance Approved hitch lock completely covers hitch head.

The HL2 Hitch Lock fits most unbraked trailers with pressed steel heads mounted on single drawbars up to 60mm wide. Designed to fit around stand, breakaway cable/chain brackets and deeper drawbars. Cast hitches fit too, where they are mounted on the drawbar similar to pressed steel hitches.

Hitchlock for hitch fitted on many small camping trailers such as Erde and Brenderup as well as other unbraked trailers. For confirmation for which model hitch fits this hitch lock please refer to our hitch lock selection fitting guide.

The Original Hitch lock will fit to your trailer hitch whilst hitched or unhitched to your towing vehicle. This prevents your car park or motorway service station thieves separating your car and trailer because the hitch handle will be covered.

The HL2 Hitch Lock has a high security anti-drill radial pin tumbler lock to deter thieves.

Hitch lock is made of tough steel, finished in Zinc pacifate, and painted bright red for maximum visual deterrent.

Compact and easily stored which makes it ideal for touring. Tough plastic hitch lock carry case available as an extra from SAS for easy storage when not in use.

Other Hitch Locks also available for other hitches.

The HL2 hitch lock is designed to fit unbraked trailers with pressed steel head mounted on single drawbars up to 60mm wide. Designed to fit around stand, breakaway cable/chain brackets and deeper drawbars

Hitch Lock Finder Guide

Welcome to the SAS Hitch Lock finder. Letters A – W show different hitches down the left hand column, corresponding with the hitch photos above the table. Along the top shows the hitch models and where the table shows a spot, that hitch lock should fit.

This Hitch Lock finder guide is not exhaustive and may not include your hitch if it is not so common. If you can’t find your hitch on this table or want further clarification on what hitch lock will fit your hitch, please contact us by sending us a photo of your hitch and one of our team will try to assist further. The hitch mounting on the trailer draw bar/A-Frame could also affect which hitch locks will fit so please bear this in mind. The Fortress Range of Hitch Locks works best on braked trailers.

The hitches most commonly found on Ifor Williams Trailers is Hitch ‘O’, the Knott Avonride Head which fits the FortA. The Hitch found on Indespension trailers is shown in photo ‘N’ – see the FortIB. Larger caravans will almost always have a Stabiliser Hitch by Alko and one of J, K or L – see Fort2Gold. Where the Caravan is older, the Winterhoff Stabiliser ‘W’ is common. Alko hitches are a common choice by trailer manufacturers and smaller caravans otherwise as shown in items D, E, F, G, & H. Please be aware that any hitch can be on any trailer so we always recommend careful checking. There is nothing to stop anyone changing the hitch from what the manufacturer first fitted. Even the manufacturer may change their hitch from what we have at time of writing!

Click to enlarge

We are official parts stockists for : Knott- Avonride , Bradley – Dixon-Bate, Alko-Kober  ,Maypole and Aspock lighting systems.

We are UK official importers for Lider trailers and  sole Lancashire stockist for Erde Trailers we also stock Meredith and Eyre trailers.